This series hot water tank is suitable for heating fresh water on
the ship or platform, heated fresh water for crew use.
Main Technical Parameters
Working pressure (MPa）
Design pressure （MPa）
Safety valve open pressure （MPa）
Water inlet temperature (℃)
Water outlet temperature (℃)
Working temperature (℃)
Design temperature (℃)
Heated water capacity (kg/h)
Electrical heating power (kw)
The thickness of the external thermal layer (mm)
The thickness of outer galvanized sheet steel(mm)
This series hot water tank can be combined to use with fresh water
pressure tank on board, that is to use fresh water in fresh water
pressure tank to replenish this tank, and then heated by electric
for usage of entire vessel.
Temperature controller:The water temperature in tank is controlled
by two WTZK-50-C pressure type temperature controllers; If the
water temperature in tank is lower than 50℃, the power will be on
automatically and the electric heater will begin to heat; If the
water temperature in tank is higher than 65℃, the power will be off
automatically and the electric heater will stop heating.
Pressure gauge: to show the pressure in tank
Thermometer: to show the water temperature in tank.
Safety valve: If the pressure in tank is more than 0.42MPa, the
safety valve will open to release the pressure in tank.
Note: Never wind the raw material belts into the inlet of safety
valve when installing the safety valve.
Float level Switch: to protect the electric heater, if the liquid
level in tank is lower than float level switch, the electric heater
will cut off automatically.